top of page

How to master your IT'S OK TOO Cassette Player

shop5.jpg

POWER

  1. IT’S OK TOO Bluetooth 5.0 Cassette Player is powered with two AA (UM-3) batteries.
     

  2. Open the Battery Compartment on the back of the IT’S OK TOO Bluetooth 5.0 Cassette Player by sliding open and gently pulling upwards the battery door.
     

  3. Check the polarity (+/-) inside the battery compartment.
     

  4. Insert two AA (UM-3) batteries according to the polarity.

  5. Re-close the battery door.

 
For best performance and extended operating time, we recommend using alkaline or rechargeable batteries.

Charging function (* FOR Rechargeable Battery ONLY*) :

 

  1. Use USB-C 5V adaptor (not included) connected to the USB-C Charging Jack.

  2. Slide the Battery Charging ON/OFF switch to “ON“

  3. Charging LED (11) Indicator (Red LED) will light on while battery charging

  4. Charging LED (11) Indicator (Red LED) will light off while the battery is fully charged

 

********IMPORTANT!*****

Never Charging the standard alkaline or carbon-zinc batteries, charging function only for rechargeable batteries!!

3.5mm output

  1. Insert Headphones plug into the Headphone Jack.

  2. Put on the Headphones.

  3. Open the Cassette Door and insert a pre-recorded cassette tape face upwards.

  4. Close the Cassette Door.

  5. Press the Play Button.

  6. Adjust the Volume Control Knob to your preferred sound level.

  7. Press the Fast Forward Button if you wish to rapidly advance the tape.

  8. Press the Fast Backward Button (4) if you wish to rapidly rewind the tape.

  9. Press the Stop Button to switch off.

shop10.jpg
NINMLab_ITSOKTOO_CassettePlayer_Mood_3.jpg

 BluetootH

  1. Please make sure to turn on your Bluetooth receiver devices first.

  2. Make sure your Bluetooth Receiver device releases the signal for connection. Please refer to the user manual of your Bluetooth Receiver device.

  3. Before playing the cassette tape, slide the BT On/Off switch to the “ON“ position, the Bluetooth LED Indicator will be flashing

  4.  The connecting process can take up to 60 seconds.

  5.  When the connecting process is completed, the Bluetooth LED Indicator flashing will slow down.

  6. You can now listen to the music on the cassette tape by using your Bluetooth Speaker or Bluetooth Headphones.

  7. Adjust the Volume Control Knob to your preferred sound level.
     

***TIPS:

1. If bluetooth keep disconnected please change the batteries or recharge the rechargeable batteries.

 

2. You need to release the bluetooth signal, not just turn on your device. If you not sure how to release the bluetooth signal, you can google "the model of your device" + "Pairing mode".

bottom of page